The Powercrete Advantage - Powercrete is a solvent free epoxy coating used for directional drilling, girth welds, bends, fittings and odd shapes, rehabilitation, offshore, patch and repair applications.
Powercrete has been recognized as the performance leader in industry-sponsored independent testing.

The versatility of Powercrete Epoxy allows it to be used as an abrasion resistant overlay (ARO) to Fusion Bonded Epoxy (FBE) and as a direct to metal (DTM) coating over sandblasted steel.

Powercrete is the ultimate ARO coating for slick bore applications. Powercrete is a polymer concrete that bonds chemically to fusion-bond epoxy coated pipelines. Normally it does not require any surface preparation to new fusion-bond epoxy. Because Powercrete has a high shore hardness and extremely slick surface, it is believed to be the best product available for slick bore applications.

Powercrete is part of the Seal For Life Industries line of protective coatings and corrosion prevention products.

Corrosion Protection

powercrete j

Powercrete J is the ultimate girth weld coating for FBE and CTE coated pipes. Powercrete J is a single coat, 100% solids, high build liquid epoxy coating designed for repairing and rehabilitating pipelines.

powercrete r95

Powercrete R-95 is 100% solids, solvent free, high performance, two component novolac based liquid epoxy coating designed to coat new line pipes as well for the repair and rehabilitation of existing pipelines.

powercrete r150

Powercrete R-150 is 100% solids, solvent-free, high-performance, two component novolac based liquid epoxy coating. Powercrete R-150 is specifically designed to coat, repair and rehabilitate pipelines operating at ultra-high temperatures, up to 300° F.

powercrete DD

Powercrete DD is a 100% solids, solvent-free, high-build, extreme performance liquid epoxy polymer concrete designed for directional drill, thrust bore and pull-through applications. Powercrete DD is applied directly over the mainline coating of a pipeline such as FBE (Fusion Bonded Epoxy) and other coatings.

powercrete r65/f1

Powercrete R-65/F1 is a fast cure, 100% solids, two component, high build, high performance liquid epoxy which provides excellent long term corrosion protection for bare steel.

powercrete r65/f1 cartridges

Powercrete R-65/F1 spray cartridges are a 100% solids liquid epoxy coating with a quick cure time for fast efficient repair of fusion bonded epoxy coated pipe or for girth welds on FBE coated mainline pipes.

powercrete r60

Powercrete R-60 is a high-build liquid epoxy coating designed for corrosion protection of buried pipelines coated with Fusion Bonded Epoxy (FBE) and it is ideally suited for the corrosion protection of girth welds on FBE coated pipes, also for valves, fittings, bends and for rehabilitation of pipelines.

Abrasion Resistant Overlay (ARO)

powercrete epoxy coatings - applications and uses

Powercrete is used as a corrosion prevention coating.
Powercrete is used as a directional drill coating and as an abrasion resistant overlay (ARO).
Powercrete is used as a rehabilitation coating for pipelines.
Powercrete is used for corrosion protection on offshore applications.
Powercrete is used in water and wastewater applications. It exceeds AWWA C210 and C222

powercrete j epoxy pipeline coating
Powercrete J
powercrete r60 epoxy coating
Powercrete R60
powercrete r65/f1 fast cure epoxy coating
Powercrete R65/F1
powercrete r95 epoxy novolac coating
Powercrete R95
Powercrete - seal for life industries

Powercrete is part of the Seal For Life Industries line of protective coatings and corrosion prevention products.
Protection Engineering has a long relationship with Seal For Life Industries and is set up as an authorized packager and distribution facility for Powercrete® epoxy pipeline and corrosion protection coatings .

Powercrete R65/F1 - Hand Application

Powercrete J - Spray Application